this guide I will tell you how to scan for passwords and to crack them using accessdiver. After doing everything what's in this guide you will be able to scan for passwords for yourself using anonymous proxies. The result will be hopefully a list full of working passwords!

you needs below things to make it done!!!

01) accessdiver : this is the program which will scan and crack passwords for you.
02) wordlist : this list are the words accessdiver uses to find vulnerable combo's.
03) proxylist : this lists are very important, when using these you are untraceable and you can continue scanning uninterrupted.

Step 1: setting up
I will tell you the setup here, how and what and the right choices for an optimal effect.
01) Install and start accessdiver and take a look, it looks advanced too new users and it really is, scanning passwords is just a small thing what accessdiver can do.
02) On the topmenu click "My Skill" and select "Expert - I'm an expert user ...".

03) You can see the subtab "search" highlighted, a few tabs further you will a see a tab "settings" click it the settings subtab "Access" is highlighted. You will see 6 sections here, i will tell you which boxes in which sections to check.

- In the "Analysis Accuracy" section, check both boxes.
- In the "Stopping a security test after" section, check the first box: "Never stop - continue till the end"


04) In the "settings" tab you see subtabs, click "Search". You will see 3 sections here, i will tell you what needs to be checked or setup.

- In the "Word size control" section check the box. Change the both minimum sizes to 1 and maximum sizes to 30.
- In the "What to do with logins found" section select the last option: "Put them at top of your wordlist (FAST)"


Step 2: Proxy List
Here i will explain what to do with the proxy list which you should have downloaded. Using a proxy is smart because it is anonymous, so your hostname or ip won't be seen by the site which you wish to crack.
01) Select the "Proxy" tab which is next to the settings tab i talked earlier about. Click the subtab "Proxy Analyzer".
02) On the lower right you can see 3 vertical tabs, click the one that says: "Parameters". Check box 1: "Auto-deletion of bad proxies after after a test completion" and check box 4: "Auto-delete proxies based on their level criteria

03) Now click on the tab left of "Parameters" which is called "Proxyjudge". Check box 4 and 5. Which you can see at the lower right side.


04) Now to load your proxy list click the yellow directory looking icon and load your list where your proxies are in. If you downloaded my proxy list it is "newlistproxies.txt". Pic006 + Pic007





05) After loading the list you will see a lot of proxies here. Click the "Speed/Accuracy Tester" button and wait for the test to finish. You can monitor the test by looking at the top bar which displays how many % is tested. Pic008 + Pic009





06) After you are done with the first test start the 2nd test "Confidentiality tester". Pic010



07) When both tests are completed, select all proxies by clicking the first and then press ctrl+a. Now it's time to remove the bad proxies. To do so, click the "brush" icon near the lower right tabs and do the first 5 options one after each other. One done your list contains only working proxies. Pic011



08) Now you have to save all those working proxies into a file. Click the "floppy" icon which is next to the "directory" icon. Make sure where you save as you will need it later. After this, your are done with the proxies. Pic012



Step 3: Additional Settings
Here we will check the right proxy settings.
01) Click "My List" subtab, which is before the "Proxy Analyzer" subtab talked earlier about. And check the box: "Use web proxies". A whole new section appeared. Pic013



02) Click the "directory" icon on your right and load your proxy list. Highlight the first proxy and press ctrl+a. Now with all proxies highlighted click on the big "checkbox" icon, which is above the "directory" icon.
03) On your left in the first section check the box: "Rotate proxies after ..." and set the value to 1.
04) In the "Proxy skipping" section check box 1 and 2 and the last one.
05) In the "Proxy error handling" section check both boxes.
06) In the last section select the first option: "Don't reactivate proxies (=stop process)". And that's it for the proxy settings.
Those steps, 2 to 6 can be seen in this pic: Pic014



Step 4: Wordlist
The wordlist will be configured now.
01) Click the "Dictionary" tab, which should be next to the search tab (when you open accessdiver). Now click on the big button: "Load a combo file" and select your wordlist. (english.txt in this tutorial's case) to load it. Pic015



02) Now find the bar where it says: "Test speed", change it to 150 by moving the pin to the end. Pic016.



Step 5: The Final Step
In this section i will tell you the latest things to do to scan for passwords.
01) In order to crack a site you need a members url, an url which ask for a username and password, any other site won't work knowing you need a members site url. The members url is ofcourse password protected, so as an example we took the porn site blacksonblondes.com. Their members site: is password protected. A good site to scan at. You can find a members url at the main site under the header "member" or "member's area". Pic017



02) After you have copied the members url make sure you have all things set correctly, like the proxy and the wordlist and the main settings, else it could not work or give problems. Copy that link into the "server" box at the top of accessdiver. Pic018



04) Click on the most left button of accessdiver that says "standard" and let the cracking begin. Look at the progress bar for a indication of how much % of the words is checked. Pic019



05) Found passwords appear in the "History" tab just next to the "dictionary" tab. Pic020



Some guys won't understand it very well , but for those who knows this ....its easy.

Thats it Guys ... Happy Cracking