this is the one stop for all the cable hacking needs....
includes,
firmware, howtos, mac address sniffers, and blackcat.
Schwarze Katze is software that is that is for the Blackcat programmer. This software allows you to communicate with a modem (such as the SB5100) using Blackcat and perform many common tasks, such as changing firmware, change the bootloader, and change the MAC address. This software is the basis for installing firmware hacks such as SIGMA-X and X2.
inculded with the program. is serveral how to make the programming cable.
firware included.
Build 13.5 FERCSA STEALTH VERSION for SB5100
#What is it?
It's a version of the TCNiSO's SIGMA-X2 Build 128 with some extra features,
based on Boltar's cracked edition.
#Features:
- Full Flash Backuper, you can save the 2Mb full flash from the web interface, its much faster like SchwarzeKatze.
- Community String Miner, i tested on a DOCSIS 1.0 config file. (if your community string is 'xsfdafsa' or something hotchpotch its not a usefull feature..)
- Tricky config downloader. READ my important notice!
- CM Certification downloader, you can save your modem cmcert without OID.
#Change Log:
Build 13.0005
- New web interface.
- Changed SNMP port from 161 to 225 and SNMPtrap port 162 to 226
- Spoofed software version to the latest, you can check this on 192.168.100.1/mainhelp.html and with the sysDescr command.
- only for dual wan router users i attached a port changed version in the archive, access port: 1338
- Active connections button.
###########
#IMPORTANT#
###########
1)
Config downloader: Type the tftp ip and config file name in the boxes and press change if its done you can save your
config file with the 'Save' button. Next you need to reflash my firmware! DONT FORGET!
If you restart without reflash you got a SB without brain :]
2)
This build's stealth function NOT equal with RC4 Stealth mode, because RC4 release your IP stack.
If you like to turn on this function type this in your telnet: (every restart!)
cd ip_hal
ipconfig 1 release [then type yes]
cd ..
Sigma-X 1.06 RC4i Beta *the 'i' is for IMPROVED
Updated Sigma-X 1.06 RC4 to be a better Spoof of Current Firmware.
*removed obvious tcniso and sigma references.
*updated spoofed firmware build
*fixed checksums (no hacked bootloader needed)
*added debugging info striped from original FATSH
*no need for tcniso crap loader... use the boot loader included (but you don't have too) as it restores remote firmware booting and flash select prompting
*also remove tcniso crap piggy back loader... (tcniso version was text hacks)
the how to section goes over
how to add diagnostic serial output directly to SB5100
how to tftp
a how to Hard Reset a 5100 if you've "bricked it"
and a how to Setup the cable modem for modification.
in the mac address section there is
Coax Thief, (also known as CMSniff), is a generic cable modem sniffer application that can be used to discover the names of cable modem configuration files.
DiFile Thief, is a packet sniffer that captures DHCP packets with boot filenames (also known as a config file). The purpose of this application is to discover all of the config files used on your local service provider. This application does require the WinPcap driver installed (
www.winpcap.org).
and then the mac grabber. it grabs the mac address from a node and returns the mac address to u along with the speed of the unit.
download: